DAPAudio D3207 Entertainer mobile set pro, Руководство по эксплуатации продукта

Страница: 10 / 31

8
Master section
13. Master Fader
This fader controls the Left and Right output level.
14. Balance control
In stereo mode, using the balance control allows you to change the output signal’s position within the
stereo image. In center position, the audio signal is equal for both the left and right output.
In dual mode you can adjust the amount of signal send to the main output and the monitor output.
15. Main stereo/monitor switch
The power amplifier can be used in stereo or dual mode. In stereo mode, the system operates as a
traditional stereo mixer and power amplifier. In dual mode, the sound of DVD, tuner and effectbus is
routed to the main output only. The monitor output will only receive dry signals from the mixer (no effects)
no signals from the DVD and tuner.
In dual mode, the main mix is made using the
Level (1, 7) controls while the monitor mix can be made
using the Eff/Aux (5, 11) controls.
16. EQ On/Off switch
You can press the EQ button to turn this section on.
17. 7-Band Equalizer
All 7 frequency bands (60Hz, 160Hz, 400Hz, 1KHz, 2,5KHz, 6KHz, 16 KHz) provide a ±12dB
amplification/attenuation. You can change the overall sound, thus meeting your requirements for
different locations. If you want your sound to have more bass, you have to boost the low frequency
range, using the 60Hz or the 160Hz controls. If you experience too much bass, lower the levels of the
60Hz and 160HZ controls. If the mid-range sounds a bit nasal, try attenuating the 1KHz, 2,5KHz and
6Khz controls by some decibels. If you want to have a clear and highly intelligible sound, you should
increase the level setting of the 6kHz or 16kHz band a bit. When using the equalizer, less attenuation is
better than a great change of the control settings.
18. LED VU Meter
DSP section
01-09 REVERB HALLS
10-19 REVERB PLATES
20-29 ECHO REVERB
30-39 CHORUS REVERB
40-49 DELAY STEREO
50-59 DELAY MONO
60-69 REVERB HALL2
70-79 REVERB ROOM
80-89 ECHO
90-99 SPECIAL
19. DSP Display
Indicates the selected preset number.