29
0
4
5
8
9
3
•
V
e
rsi
o
n
2
.3
•
1
6
.0
3
.2
0
1
2
3.2 How to install power to the MTS 4-outdoor enclosure,
contin-
ued
Procedure,
continued
Step
Action
8
Tighten the cable gland in the entry
hole (use appropriate tooling) so the
cable is locked and the IP barrier is
activated
9
Reinstall the cover of the power distribution panel and switch power on to the
MTS4 outdoor enclosure
Other entry
holes
4 Other entry holes are available for other ca-
bles for i.e. communication lines or generator
power input.
These are on a loose mounting plate located in
the bottom just behind the right door.
There are 3 PG11 glands and 1 additional
PG21. To avoid any ingress to the cabinet,
they are plugged by delivery and should re-
main so until put in use
Example of a data cable routed through a ca-
ble gland
Please note that all entry holes must be cov-
ered at all time to avoid moisture ongress due
to condensation
