24
3.1 How to unpack and mount the MTS4-outdoor enclosure,
con-
tinued
Procedure,
continued
Step
Action
8
Slide in the outer cover closest to the rear
side of the enclosure and join the mid
screw in the side closest to the front side
of the enclosure.
9
Repeat step 7 and 8 on the opposite side
10
Attach a blind for the holes that are left
open on both sides of the enclosure by
two rivets, if additional protection towards
intrusion is requested.
The blinds are supplied with the enclo-
sure
11
Install the protection cover on the upper
right side of the enclosure after all anten-
na cables have been installed to desig-
nated surge arrestors
Use 4 included M6 nuts with washer
(10 mm spanner) to secure the cover
Install 4 rivets on the top plate of the pro-
tection cover if further protection towards
intrusion is requested
Continued overleaf
