Dantherm HRV 5, Руководство по обслуживанию

Страница: 30 / 158

28
How to set programmes
Introduction This section describes how to set a pro-
gramme.
Display shows that the menu ”Programs” is activated
(P01 is flashing):
NB One programme can only be selected until midnight.
This means that a programme running from 22:00 to 07:00 has to be programmed as
two programs.
Example If you want the fan speed to be running at step 1 all nights from 22:00 to 07:00, the fol-
lowing programs have to be programmed:
Program Period of time Weekdays Fan speed
P 01 22:00 to 24:00 Monday until Sunday Step 1
P 02 00:00 to 07:00 Monday until Sunday Step 1
When a program ends, the fan speed automatically returns to the manually selected
step. See the section ”How to set fan speed” page 25 for manual selection of fan
speed.
Procedure
Follow this procedure to enter the programs:
Step Action Result
1 Follow the procedure for activating the remote
controller and menu in the section ”How to
use the remote controller
” på side 22
The selected menu is acti-
vated
2 Press UP/DOWN buttons to find the program
that has to be changed Digits showing program
change
3 Press OK at the program that has to be
changed Weekday is flashing
4 Press UP button to select the flashing week-
day or DOWN button to opt out the flashing
weekday Next weekday is flashing
5 Repeat step 4 for all weekdays Next weekday is flashing
Continued overleaf