Dantherm DanX 2/4 XKS, Инструкция по установке, пусконаладке и обслуживанию, Страница: 21 / 39

4. COMMISSIONING
19
4.1.2 Unit function DanX – XKS with integrated mixing
The DanX – XKS consist of a cross flow heat exchanger with integrated mixing.
The DanX XKS is using a minimum outdoor air which is required for hygienic reasons in the
pool hall.
To keep pressure drops low, only part of the return air is run through the heat exchanger.
The rest is re-circulated and heated in the re-heater. If the dehumidification capacity is not
sufficient the amount of dry outdoor air automatically increases.
For further explanations about the controls of this unit, please refer to the manual of the
control panel.
4.1.3 Unit function DanX – XK with separate mixing module
The DanX – XK consist of a cross flow heat exchanger with a separate mixing module.
The DanX XK is using a minimum outdoor air which is required for hygienic reasons in the
pool hall.
To keep pressure drops low, only part of the outdoor air is run through the heat exchanger.
The rest is re-circulated and heated in the re-heater. If the dehumidification capacity is not
sufficient the amount of dry outdoor air automatically increases.
For further explanations about the controls of this unit, please refer to the manual of the
control panel.