Dantel 46062-02, Руководство по установке и эксплуатации

Страница: 55 / 64

46062-0299 <90-00016> P
AGE
55
The symbol # can be an individual device, it can be a group of
devices, or it can be the term ALL, meaning all devices. ID # can
be any or all addresses from 1 through 32.
DISP # can be any or all displays from 1 through 64 (and GPP’s
internal displays 65-73).
PNT # can be any or all points from 1 through 64.
Input Example:
REPORT ID 1 DISP 5 PNT 32
Output Response:
1 5 32 LM TOWER 4 LIGHT OUT
NOTE: This reads as address 1, display 5, alarm point 32, which is a
local minor alarm indicating that tower 4 light is out.
To stop a report, press D on the front panel of the Status Moni-
tor or type Ctrl+D if you have a keyboard.
To pause a report, press ENTER on the front panel of the Status
Monitor or type Ctrl+S if you have a keyboard. To resume the
report, press ENTER (or Ctrl+S) again.
R
EPORT
C
ONTROL
Purpose:
Displays the control point information for alarm annunciators.
Format:
REPORT CONTROL ALL
REPORT CONTROL #
Remarks:
Reports which alarm points are associated with the specified con-
trol points.
There can be up to a total of 64 control points, with a maximum
of two points assigned to each alarm point.
A control point can be assigned to more then one alarm point.
The symbol # can be a control point or a range of numbers from
1-64.
PRINTER SYNTAX