manualshive.com logo in svg

Dantel 46062-02, Руководство по установке и эксплуатации

Поделиться
Скачать
Dantel 46062-02 Скачать руководство пользователя страница 39

46062-0299 <90-00016>

 P

AGE

 39

Output Response:

DISPLAY MODE IS GLOBAL

OK

NOTE:

Switch S1-7 and/or switch S1-8 must be set to the appropriate
position before the alarms can be masked.

D

OWNLOAD

Purpose:

Downloads the database from the master GPP to the slave GPP.

Format:

DOWNLOAD ALL

DOWNLOAD DESC ID # DISP # PNT #

DOWNLOAD CON

DOWNLOAD GPPSTAT

Remarks:

DOWNLOAD ALL will download the entire database, with the
exception of the local/global display information. The other
commands download the information specified.

The symbol # can be an individual device, it can be a group of
devices, or it can be the term ALL, meaning all devices. ID # can
be any or all addresses from 1 through 32.

DISP # can be any or all displays from number 1 through 64
(and GPP’s internal displays 65-73).

PNT # can be any or all points from 1 through 64.

E

DIT

Purpose:

Used to edit alarm point description text, display, and level
descriptions.

Format:

EDIT ID # DISP # POINT #

PRINTER SYNTAX

Содержание 46062-02

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды