manualshive.com logo in svg

Dantel 46062-02, Руководство по установке и эксплуатации

Поделиться
Скачать
Dantel 46062-02 Скачать руководство пользователя страница 2

P

AGE

 2

46062-0299 <90-00016>

ORDERING INFORMATION

GENERAL DESCRIPTION

T

he 46062 General Purpose Processor (GPP) provide a data

base of all alarm points, operate up to 64 annunciator points

and operate remote controls. You can send alarms from the GPP
master port to an alarm system master. You can perform local
monitoring by connecting the GPP printer port to a computer or
dumb terminal.

There are two module options:

The GPP has outputs that you can connect to external audible
and visual equipment for reporting alarm levels. You can config-
ure the GPP using the Printer Syntax commands in this manual
or a separate program (such as Dantel’s 46502 Status Monitor
GPP Editor).

The module has three communications ports: the master, data,
and printer ports. Each port is capable of asynchronous RS-232
communications. The master and data ports also can accept
asynchronous RS-422/485 communications.

NOTE:

When referring to the port which interfaces the equipment
being monitored, “data port” and “remote port” are used
interchangeably and refer to the same port.

The GPP is a plug-in printed circuit module that fits into any
Dantel 400-type or similar equipment housing. The module
operates on -21 to -56 VDC.

PART NUMBER

C11-46062-02
C11-46062-03

DESCRIPTION

Monitors up to 32,768 alarm points.
Monitors up to 8,192 alarm points.

NOTE: This section lists the different options available for this product. To order any of the avail-

able options, contact Dantel Inside Sales through our toll-free number, 1-800-432-6835.

OPTION NUMBER

FEATURES

C11-46062-02

General Purpose Processor; monitors up to 32,768 alarm points

C11-46062-03

General Purpose Processor; monitors up to 8,192 alarm points

Содержание 46062-02

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды