Dante Inovonics 541, Инструкция по установке и эксплуатации, Страница: 50 / 56

— 46 —
Notifications,
(Send What)
You may assign any or
all alarms to any or all
email or text addresses
Recipients the Notifica-
tions
section.
Referring to the example
here, click the down ar-
row to select
Recipient: 1.
through 10. With a Recip-
ient: selected, click the
Send Emails For:
boxes to
choose which alarm con-
dition(s) will be reported (and/or alarm logs dispatched) to that
specific individual.
In this abbreviated example, the Chief Engineer will receive a
text message on his phone for Audio Loss and Low Signal alarms,
and have the Weekly Log downloaded to his phone as well.
When you’ve finished with this
Recipient: , proceed to the next.
No
Save
command is necessary in this operation.
TIME SETUP
Time and DST
The internal Real Time Clock gets daily updates from Internet
Time and has sufficient inherent precision to remain accurate
within this schedule.
Grab and drag the
Time
Zone (Hours): slider for
the proper offset from
Universal Coordinated
Time for your location.
In this example, the
–8
represents West Coast
US (Pacific) time. The
time at the top of the
page will update rapid-
ly, so you can simply
drag the slider until
the time shown here agrees with your Rolex Cosmograh, or
perhaps an even-more-accurate (crystal-controlled) Timex.
Daylight Saving Time:
defaults to the
Auto
mode, though you may
either opt for this convenience or click the down arrow to select
On
or
Off
for DST.
Presentation
Formats
Time Format: can show either a 12 Hour or a 24 Hour clock, and
the
Date Format:
can reflect either US or European conventions.
The date is automatically set by the Internet Time Server.
RTC Battery
The Real Time Clock has a backup battery located on the main
541 circuit board. This is a 3V CR2032 flat ‘coincell’ battery