Dante Inovonics 541, Инструкция по установке и эксплуатации, Страница: 21 / 56

— 17 —
Remote
Listening
Click the loudspeaker icon at the top-right of this
or any other Webpage to listen to off-air audio
through your Web browser. Up to 10 listeners can
access this audio stream simultaneously, but lis-
teners may also be restricted. Instructions for FM or SCA pro-
gram selection and for limiting the number of listeners are giv-
en in the streaming audio discussion on Pages 39-40.
Other Stream-
Listening
Options
You may wish to allow personnel outside the engineering staff
to listen to the 541 stream without granting them the ability to
view 541 Webpages or change any of its settings. You will need
to open a router port to use this IP-address method, but then
one simply ‘points’ a computer browser or media player app at
the URL of the audio
stream, adding
/stream
as shown here. Of
course this isn’t a ter-
ribly secure privilege as
the slash may suggest
other suffixes to be tried
to hack other functions.
NOW PLAYING
The Now Playing Webpage was shown complete on Page 15.
This page and some others require you to scroll down to see
everything, depending on the device you are using and its
browser settings. Pages that require scrolling will be discussed
by separate function sections.
Reception
Status-In-Brief
This top part of the
Now Playing
Webpage screen shows just the
more critical incoming signal parameters. The frequency is
prominent above the signal-quality matrix. Note that the
readout boxes contain a tiny scrolling graphic to display the
subject parameter over time. Y-axis scaling is automatic with
maximum/minimum figures for the time period. Some of these
parameters, along with others not in this grid, are displayed
graphically with much greater detail and with selectable time
scaling on the
History Plots
Webpage.
Readouts in the top row give:
RSSI
, the incoming FM carrier
strength in dB (relative to 1 microvolt at the antenna input); RF
SNR
, or signal-to-noise in percent relative to an ideal (100%)