Dante Inovonics 541, Инструкция по установке и эксплуатации, Страница: 24 / 56

— 20 —
cation, although FM subcarrier parameters are no longer sub-
ject to government regulation in the US. Whatever this slider is
set for represents 0dB on the SCA modulation readout (Page
25).
Station Presets
The 541 offers thirty station-memory presets. Once tuned to a
station, click Save as New . This will open a box where you can
enter call letters or a short ‘street name’ for the station. Then
click
Save
in that same box and your entry will be entered at
the bottom of the Preset Stations list. Presets are cleared from
the list by clicking on the
X
at the right of the listing.
Stored
Preset Stations
data also contains the various setup op-
tions and alarms specific to that station preset when it was en-
tered into memory. If you make
changes to any option, the grayed-
out Save Changes bar will immediate-
ly come alive as shown here, prompt-
ing you to save the changes, assum-
ing that you want them updated.
Important!
Alarm programming instructions begin on Page 34. If you
make any changes to alarm settings, or to the miscellaneous
selections listed below, you must return to the Now Playing
Webpage and click the Save Changes bar to permanently associ-
ate your option updates with that station preset.
StationRotation™
A mod-monitor is historically employed as the station’s full-
time measurement utility to alert engineering personnel to out-
of-tolerance operation. Although the 541 certainly fulfills this
bbasic qualification, it has the added versatility of being able to
‘ride herd’ over multiple stations in the local market, but not
without some dilution of its primary functionality.
The 541 has the built-in capability of sequencing through all
the saved
Preset Stations
entries in the order listed, and at a se-
quence rate set by the user. This could, for example, allow a
contract engineer to receive alarms from any of a number of
stations he might service in a given market.
First, stations in the Preset Stations
list must be ‘tagged’ to be included in
rotation. Click the checkbox next to
the listing to place the station on the
rotation schedule.
Next, enable
StationRotation by setting
Enable:
to
On
as shown in the next il-
lustration. This will inhibit manual
tuning by graying-out the manual
Tuner
setup section complete-
ly. This means you will have to reset
Enable:
to
Off
to manually
tune the 541 and set any additional station presets.