Dante Inovonics 541, Инструкция по установке и эксплуатации, Страница: 17 / 56

— 13 —
your finger to push the slider left and right or click the
<
and
>
buttons to fine-tune your setting.
Similarly, for the LCD display itself, Brightness: controls the
back-light. Timeout: sets the time that the display will remain on
after you finger leaves the screen. Toggling the
Dim on timeout:
button will instead just reduce the brightness to a low, but still
visible level rather than turning the backlight off. Touch
Sleep
Display
to preview your timeout action.
LED Level
Readout Bars
The three peak-responding LED bargraph readouts give quasi-
peak-responding level displays of the FM composite-MPX signal
and the demodulated left/right channel analog-FM program
audio. A peak-hold segment hovers above each bar to indicate
the highest, most-recent value registered.
Headphone
Volume
Arrow #2 on Page 11 points to the headphone icon. Touching
this will bring up a screen where the headphone volume may be
adjusted. This screen will pop up automatically when head-
phones are plugged in. The program line outputs and their
levels may be selected and set here, as well as under the LCD
and Webpage
Setup
menus.
The ‘Home’
Menu
Arrow #3 on Page
11 points to the
little cottage icon.
Touching this will
bring the ‘Home’
screen into view,
giving an overview
of station signal
parameters, inclu-
ding the more per-
tinent RDS data
fields.
BRINGING UP THE WEBPAGE SERVER
Network
Considerations
To access the 541 Webserver interface, both the 541 and your
computer must be on the same Local Area Network (LAN). As
promised, the 541 can be accessed from a computer, tablet or
mobile phone anywhere in the world, but your network must
first be set up to make this possible. This process is addressed
in the Networking section later in the manual.
Finding the
541 IP Address
With both your computer and the 541 plug-
ged into your LAN, and both turned on, go to
the 541 LCD-touchscreen and touch the
menu icon in the upper-left corner. Then
touch Network to open the screen that in-
cludes the network setup options shown on the following page.