Dante DLM1771, Инструкция по установке и эксплуатации

Страница: 22 / 40

5. OPERATIONS
5.1 BASIC DESCRIPTIONS
After connecting wires as per instructions in previous section and turning on power, the
pan tilt camera will display its configured information. And after initialization, the menu
will show “configure OK” information. If the user sets the POWER UP DONE, the
camera will execute this movement and the initial screen disappears; if the user does
not set the POWER UP DONE, the initial screen information will be seen until the
camera receives the control command, then the initial screen will disappear and show
the system communication control is normal. If there is no control command, the initial
screen will disappear after 3 minutes.
Power up display
：
When configuring
：
Configure OK:
VERSION 1.9
PROTOCOL P
ADDRESS 1
COMM 2400.N.8.1
POWER UP DONE
VERSION 1.9
PROTOCOL D
ADDRESS 1
COMM 2400. N.8.1
CONFIGURING
VERSION 1.9
PROTOCOL P
ADDRESS 1
COMM 9600.
N.8.1
CONFIGURE OK P:000/T:00