Dante DLM1771, Инструкция по установке и эксплуатации

Страница: 33 / 40

When it is ON, and it is in the status of non-menu, the all privacy zone will be open
when setting 64 preset; and closed when using 64 preset. This kind of function is for
the open and close of the whole privacy.
PRESET 1 ALLOW default setting is
：
OFF
PRESET 1 ALLOW has “ON” and “OFF”
Note
：
ON: allow the special function of the 1 preset; OFF: prohibit the special function
of 1 preset.
When it is ON and it is in the status of non-menu, use the 1 preset, then the
Pan/Tilt and camera will run to the position of 1 preset, and close the all
privacy; and the privacy will appear when moving the Pan/Tilt or changing the
zoom of the camera.
ZOOM ×1 ALLOW default setting is
：
OFF
ZOOM ×1 ALLOW has “ON” and “OFF”
Note
：
ON: allow the special function of camera 1x limit. OFF: close the special function
of camera 1x limit.
When it is ON, and the camera is in 1x optical zoom, the privacy zone will not be
shown. All will appear when the camera is above 1x optical zoom.
When it is OFF, all the privacy will be shown no matter what optical zoom the camera
is in.
Special :
When the <ZOOM X1 ALLOW> and <PRESET 1 ALLOW> are both in ON, the all
privacy will close by transferring the preset 1.when moving the Pan/Tilt or zooming
the camera in the place of preset 1, there will be 2 kind of situation: 1> if the optical
zoom of the camera is above 1x, the privacy will appearance immediately; 2> if the
zoom is less than 1x, the privacy will not appear. By transferring other presets, there
will be also two kinds of situations: if the optical zoom recorded in this preset is less
than 1x, the privacy will not appear; if it is above 1x, the privacy will appear
immediately.
SAVE
Save the privacy data which has been successfully set.
Note: If the SAVE command is not executed and exit directly, all the data which have
been set will be invalid.