Dante DLM1771, Инструкция по установке и эксплуатации

Страница: 5 / 40

1.3.2 FUNCTION DESCRIPTIONS
Screen menu function (OSD)
It has screen menu function. All information of camera and pan& tilt may be displayed
by menu and to set the function and parameter
Multi-camera control function
Select different camera only by mending dial switch setting, no any hardware or
software needed. It supports SONY, HITACHI cameras and so on.
Proportional pan
Horizontal and tilt speed change automatically with the zoom changes. When zooming
wide, the camera speeds down; then zooming narrow, the camera speeds up to catch
better tracing effect.
Auto scan
Auto scan refers to the function of 360
0
continuous scan the images at certain speed
on the horizontal lever when keeping the pitching angle unchanged. The left and right
limits may be set for continuous scan at certain speed on the horizontal lever.
Auto Flip
When the camera tilts downward and goes just beyond the vertical poison, the dome
rotates 180°. When the dome rotates, the camera starts moving upward as you
continue to hold the joystick in the down position. Once you let go of the joystick
after the dome rotates, joystick control returns to normal operation. The auto flip
function is useful for following a person who passes directly beneath the camera.
Preset
Any position of dome camera PTZ may be conserved. We call it preset
(pre-established position). The preset may be transferred and cleaned.
Preset Tour
The dome camera will transfer pre- established preset 1-8 every 10 second. It will
leap over to next preset position if position in not among 1-8.
Pattern
The PTZ orientation move track of the camera may be stored, we call it pattern. The
pan & tilts UP, DOWN, LEFT, RIGHT and the lens FAR, NEAR may be stored. Also we
may call the presetting. This function may be used to record and simulate the
operator’s operation process.
Zero Test
The camera will turn to horizontal and tilt zero by preset 34 when the inevitable
desynchronizing appears or the operator wants to find zero position during working
process. It may reset the orientation and is convenient for operator
Low LUX (colors/ black & white swift) function
The camera automatically changes CCD LUX according to surrounding light. Color