Dante DLM1771, Инструкция по установке и эксплуатации

Страница: 25 / 40

5.5 PTZ FUNCTIONS
This series high-speed P/T camera manual pan speed 0.1 º -100 º/second, manual tilt
speed 0.1º ~ 80º/second. Pan/tilt speed and lens zoom is proportional, darker the lens
zoom, slower the speed is!
The current position of P, T, Z three orientations (presetting positions) may be stored
and repeat use.
5.6 FUNCTION DESCRIPTIONS
5.6.1 Screen menu function (OSD)
Camera and pan & tilt may be parameters are displayed by OSD menu
5.6.2 Proportional pan
Horizontal and tilt speed change automatically with the zoom changes. When wide
zooming, the camera speeds down. When narrow zooming, the camera speeds up to allow
better tracking effect.
5.6.3 Auto scan
Auto scan refers to the function of 360
0
continuous scan the images at certain speed on
the horizontal lever when keeping the pitch angle unchanged. The left and right limits may
be set for continuous scan at certain speed on the horizontal lever.
5.6.4 Installation mode
The camera may be installed upwards or upside down according to requirements. The
image will always be showed positive on the monitor no matter the installed position.
5.6.5 Preset
Any position of P/T camera PTZ may be stored. We call it preset (pre-established
position). The preset may be transferred and deleted.
5.6.6 Preset tour
The P/T camera will transfer pre-established preset 1-8 every 10 second. It will leap
over to next preset position if position in not any of the 1-8.
5.6.7 Pattern
The PTZ orientation and specific tracking pattern may be stored. The pan & tilt UP,
DOWN, LEFT, RIGHT and the lens’ FAR, NEAR parameters may be stored. Also we may call
the presetting. This function may be used to record and simulate the operator’s operation
process.
5.6.8 Position Zero
The camera will turn to horizontal and tilt zero by preset 34 when accidental
desynchronizing appears or the operator wants to find zero position during working
process. It may reset the orientation as a convenience for the operator