Dannmar DT-50, Инструкция по установке и эксплуатации

Страница: 3 / 84

DT-50 and DT-50A Tire Changer
3
P/N 5900260 — Rev. A1 — Dec. 2020
Table of Contents
Introduction 3 Operation 24
Shipping Information 4 Maintenance 52
Safety Considerations 4 Troubleshooting 55
Components
6 Wiring Diagram 57
FAQs 8 Labels 58
Specifications 9 Parts 61
Installation Checklist
10 Maintenance Log 83
Installation
11
Introduction
This manual describes the installation and operation of the Dannmar Model DT-50 Swing-Arm Tire
Changer and the DT-50A Swing-Arm Tire Changer with Assist Arm. The DT-50 and DT-50A are used
for mounting and demounting automobile and light truck single-piece Tires. The DT-50A includes an
Assist Tower used to aid the operator in mounting and demounting tires.
Important : The DT-50 does
not
include an Assist Tower or its tools.
More information about Dannmar products is available at
Dannmar.com
.
This manual is mandatory reading for all users of the DT-50 and DT-50A, including anyone
who sets up, operates, maintains, or repairs it.
You can always find the latest version of the
manual for your product on the Dannmar
website .
⚠
DANGER Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support and service for your Tire Changer is available from your distributor or by calling
Dannmar at
(877) 432-6627 . You may also call regarding parts replacement (please have the serial
number and model number of your unit available).