Page 17 of 31
equipment in the network, then you will need to use an Accessory Power Supply to power
the Interface.
The
Aux In
socket may be used to select between a number of ‘Voices’ that may have
been programmed into the DNA5K4 using factory files (*.dfa) supplied by your vendor.
These files would be loaded into the DNA5K4 via the PodWare application. Your vendor
will give you details of how to make connections to the Aux port when using their factory
files. The currently selected Voice is indicated on the PodWare panel. The
Aux Out
socket
allows you to chain the Aux connections on to further DNA5K4s so that the same voice
selection is done on all of them. There is no practical limit to the number of DNA5K4s that
may be chained together via the Aux sockets.
!!!Please note that although the BvNet and the Aux ports are standard RJ45 sockets, these
are not Ethernet. Do not connect these to Ethernet equipment.!!!
PodWare Amplifier Control Panel
The DNA5K4 amplifier is shipped with standard settings in the Digital Signal Processor
(DSP) so it will function in the same way as any ‘standard’ amplifier without on-board
processing.
However each two channel amplifier section contains a fully featured DSP which can be
configured to process the audio signals as required for a given application or loudspeaker
system. In addition to the digital processing the amplifiers also provide complete telemetry
and status information.
The powerful and easy to use PodWare PC application provides control and monitoring of
one unit or a whole network of devices.
PodWare and related driver software are provided on the CD which comes with the
DNA5K4 amplifier or can be downloaded free from:
http://www.danleysoundlabs.com
This section of the user guide explains the functions of the PodWare control panel for the
DNA5K4 series DSP amplifiers. For further help and information on the main PodWare
application please click on the help button on the main application. For more detailed help
