![background image](http://html1.mh-extra.com/html/danley/dna-5k4c/dna-5k4c_user-manual_3417711011.webp)
Page 11 of 31
Using unbalanced connections
When connecting the DNA5K4 amplifier to an unbalanced audio source, the signal
conductor should be terminated to XLR pin2 and the cable screen terminated to both pins
1 and 3.
2
1
3
Pin 2 HOT +
Pin 1 Shield
Input XLR unbalanced connection
In bridged mode output channel 1 signal chain provides the signal for the 1 & 2 pair of
amplifier channels, output channel 3 signal chain provides the signal for the 3 & 4 pair.
Amplifier output connections
The DNA5K4 amplifier is fitted with one Speakon
TM
connector per amplifier channel. The
appropriate conductor terminations are shown below and on the rear panel of the unit.
Amplifier output connections