Danley DNA 10K4, Руководство пользователя

Страница: 26 / 49

26
Note: Storing a Drive Module preset for a module which is not configured with consecutive
outputs is not permitted.
Note: When storing a Drive Module preset on the device, Component Names cannot be edited. To
change Component names, the Module Preset must be saved in the PodWare application.
Recalling Module Presets
To recall a Drive Module preset, press the < INPUT > button, then use the down < q > button navigate
to the RECL Preset page. Using the “ADJUST” encoder will scroll through the presets available. When
the desired preset is reached, pressing <
ENTER > will display the message “Enter to confirm or q to
exit”, pressing < ENTER > will recall the preset. Note that presets do not contain and do not disturb
parameter Overlays. See Overlays
A RECL Preset Name
SUBS
40
2 X 18 BASS
Recalling Components
To recall a Component Preset (to a single output), press the < OUTPUT > button, then use the down
< q > button navigate to the RECL Preset page. Using the encoder, “ A ” will scroll through the
component presets available (as indicated by the ModulePreset.Component number and
ModulePreset.Component name). When the desired component is reached, pressing <
ENTER > will
flash the Enter button. Pressing < ENTER > again will then recall the component preset. Note that
component presets do not contain and do not disturb parameter Overlays. See Overlays
A RECL Comp Name
SUBS
40.2
SP28.Mid
Also see Snapshots .
Input
AES3 Inputs
In addition to the usual analogue inputs, the Device can also accept AES3 digital inputs. When a DSP
input channel is assigned to an AES3 channel, the “AES3” indicator will illuminate.