PORTABLE COLL-O-CRIMP® Model T-400-1 Set up and operating instructions
2 | PORTABLE COLL-O-CRIMP® Model T-400-1 Set up and operating instructions | 2022.10.
AQ430855066686en-000101
System Specifications & Equipment
T-400-1 Coll-0-Crimp® Press Specifications
Crimping Capacity:
3/16” -1-3/8” I.D. 2-wire Hose
Weight
: 113 lbs.
T-400 Coll-O-Crimp® Press with tooling includes one each of the following:
T-400-1
Coll-O-Crimp® Press
T-400-2C
Collet -1/4”
T-400-3C
Collet - 3/8”
T-400-4C
Collet -1/2”
T-400-5C
Collet - 3/4”
T-400-6C
Collet -1”
T-400-8
Die Ring - 3/16” thru 1-3/8”
T-400-10
Spacer Ring (black)
T-400-62
Spacer Ring (yellow)
T-400-11
Spacer Ring (silver)
T-432-15
Pusher
T-400-D
Spacer Ring Decal
T-400-M
Instruction Kit
FS-1100
Label Set/Layout Guide (‘Li SeriesHose Ends)
The T-400 package also includes one of the hose and fitting options below.
If no pump is ordered, the T-400-16 is supplied.
* T-400-16
36” Hose assembly & fittings for use with T-401-1 and
T-411 Electric Pump.
**T-400-18
108” Hose assembly & fittings for use with T-402-1 Air/
Hydraulic Pump.
T-400-19
60” Hose assembly & fittings for use with T-403-1 Hand
Pump.
* Hose assembly includes (2) 4315X6X8 For-Seal adapters.
** Hose assembly includes a 4205X6X6 & 4315X6X8 For-Seal adapter.
T-421U Electric Pump
Dimensions
7-1/2” high, 10” wide, 22” long
Weight
75 lbs.
Pressure
4000-4200 psi
Reservoir Size
6 quarts
Outlet Port Size
3/4-16 Straight Thread
Motor
1 H.P., 3450 RPM, 220 volts
60 cycle, single phase
Hydraulic Oil
Automatic Transmission Fluid (ATF) or
equivalent.**SAE 10 Grade, ISO 32
Reservoir Capacity
6 quarts
Flow
2.6 GPM © 900 psi
** USE ONLY IF OPERATING TEMP. IS BELOW 0°F or above 160°F. NOTE: The electric pump
must be on an individual 15 amp fused circuit.
!
CAUTION
The Coll-O-Crimp power source has the pressure relief valve
set at 4000 to 4,200 psi. Damage to the press will result and the warranty
may be voided if higher pressures are used.
Содержание Weatherhead Coll-0-Crimp T-400-1
Страница 1: ......
