Danfoss VMBQO23H, Руководство по установке

Страница: 27 / 72

27
Preparing the heat pump 13.3
2
4
1
3
Removing the heat pump Figure 17.
Image description
Exchange valve 1
Water pipe 2
Knockout 3
T-connector with copper pipe 4
Remove parts of the heat pump as follows:
Remove the front plate� 1�
Tap out the knock out in the top panel� 2�
Detach the water pipe at the T-connector and at the exchange 3�
valve�
Remove the water pipe, T-connector and the copper pipe�
4�
Installing replacement pipes 13.4
2
5
4
3
1
Installing replacement pipes Figure 18.
Image description
Exchange valve 1
Reducer (certain models) 2
Replacement pipe 3
Copper pipe 4
Straight clamp ring connector 5
Install replacement pipes as follows:
Install the replacement pipe (086U6886) on the exchange valve� 1�
On certain models a reducer can be used (086U0229)�
On the inlet to the heater the following are installed:
Install a straight clamp ring connector (086U2371) on the end of 1�
the water pipe�
Install a copper pipe (086U3600) on the clamp ring connector
2�
(086U2371)�