Danfoss VLT FC 103, Инструкция по эксплуатации

Страница: 34 / 94

The first time the FC 103 is started up, the Application
guide is opened. After this, the Application Guide can be
accessed through the Quick Menu screen, for example,
after a power failure.
The following screen will be presented:
130BC951.10
Figure 3.1
If [Cancel] is pressed, the FC 103 will return to the status
screen. An automatic timer will cancel the wizard after five
minutes of inactivity (no keys pressed). The wizard must be
re-entered through the Quick Menu as described below.
If [OK] is pressed, the Application Guide will start with the
following screen:
130BC952.10
Figure 3.2
NOTE!
Numbering of steps in the wizard (e.g., 1/12) can change
depending on workflow choices.
This screen will automatically change to the first input
screen of the Application Guide:
130BC953.10
Figure 3.3
130BC954.10
Figure 3.4
Compressor pack set-up
The following example shows screens for a compressor
pack set-up:
Voltage and frequency set-up
Figure 3.5
Current and nominal speed set-up
Figure 3.6
Start-up and Functional Tes...
VLT
®
Refrigeration Drive Instruction Manual
3-4 MG16J122 - VLT
®
is a registered Danfoss trademark
3 3