Service Manual FCD 300
Release 01/2003
4
Revise 08/01/2003 by DD Service Manager, Steffen Sundbæk
1.
Scope and field of service manual
This Service manual is made with the purpose to help when doing technical service on the
FCD300 in the field.
The service manual will be updated continuous to be able to improved the service and
always be up-to-date.
Comment and proposal to this service manual, please send an e-mail to DD global hotline:
[email protected], with your comment.
2.
Service Policy for FCD 300
2.1.
In General
The FCD 300 is a non-repairable product.
Depending on economical or practical service situation repairs can be proceeded by
exchange of complete units or exchange the control card.
2.2.
Field Service
- Repair in the field
Exchange the drive (only the electronic part, not the installation parts)
to new or exchange the control card.
- Factory repair
No factory repair.
NB
: The complete service policy can be found on the Global Service Page.
3.
Installation, programming and basic fault tracing
For installation, programming and basic fault tracing use the Design Guide MG.04.A3.xx
4.
Replacement
Only repair option is by replacing the control card, complete electronic part or exchange
damage parts in the installation box. If the installation box, it self, is damage, then a new
have to be ordered through commercial department.
Replacing the control card could repair the electronic part.
NB
Always use ESD protection when change the control card or remove the plastic part
from the electronic part.
