Danfoss VLT CDS 803, Руководство пользователя

Страница: 32 / 76

•
•
•
•
•
•
•
•
Derating for high altitude, see 5.3.6 Derating for Low Air Pressure
and High Altitudes .
1
Refer to 5.3.4 Vibration and Shock for more details.
2
Refer to 5.3 Operating Environment .
4.6 Conforming Standards
Safety standards EN/IEC 61800-5-1, UL 508C, EN/IEC/UL 60730-1
EMC standards, Emission EN 61800-3, EN 61000-6-3/4, EN 55011, IEC 61800-3
EMC standards, Immunity EN 61800-3, EN 61000-3-12, EN 61000-6-1/2, EN 61000-4-2, EN
61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
Energy efficiency class
(1)
IE2
1
Determined according to EN 50598-2 at:
Rated load.
90% rated frequency.
Switching frequency factory setting.
Switching pattern factory setting.
For power loss data according to EN 50598-2, refer to Danfoss
MyDrive® ecoSmart website.
N O T I C E
The VLT® Compressor Drive CDS 803 with SXXX in the type code is certified against UL 508C. Example:
CDS803P7K5T4E20H4XXCXXX
SXXX
XAXBXCXXXXDX
The VLT® Compressor Drive CDS 803 with S096 in the type code is certified against UL/EN/IEC 60730-1. Example:
CDS803P30KT4E20H2XXXXXX
S096
XAXBXCXXXXDX
4.7 Cable Lengths and Cross-sections
Maximum compressor cable length, shielded/armored (EMC-cor-
rect installation) See 6.5.1 EMC Emission Test Results .
Maximum compressor cable length, unshielded/unarmored 50 m (164 ft)
Maximum cross-section to compressor, mains See 4.1 Electrical Data for more information
Cross-section DC terminals for filter feedback on enclosure size
H3 4 mm
2
/11 AWG
Cross-section DC terminals for filter feedback on enclosure sizes
H4–H6 16 mm
2
/6 AWG
Maximum cross-section to control terminals, rigid wire 2.5 mm
2
/14 AWG
Maximum cross-section to control terminals, flexible wire 2.5 mm
2
/14 AWG
Minimum cross-section to control terminals 0.05 mm
2
/30 AWG
4.8 Acoustic Noise
Acoustic noise from the drives comes from 3 sources:
DC-link coils
Integral fan
RFI filter inductor
AJ330233902305en-000201 / 130R0596 32 | Danfoss A/S © 2021.05
Specifications
VLT® Compressor Drive CDS 803
Design Guide