VLT
®
Series 2000
4
WARNING
The VLT
®
Series 2000 Adjustable
Frequency Drive (AFD) contains
dangerous voltages when connected to
line voltage. Only a competent electrician
should carry out the electrical installation.
Improper installation of the motor or the AFD may cause
equipment failure, serious injury or death. Follow this
manual and local and national safety codes.
The motor may start without warning during operation
and programming of the parameters. Activate the STOP
key on the VLT keypad when changing data.
Danfoss CE marks our VLT
®
Adjustable Frequency
Drives (AFD) according to the Electro Magnetic
Compatibility (EMC) Directive 89/336/EEC and Low-
Voltage Directive 73/23/EEC.
When the installation specification is followed and
shielded motor cables are used per instruction manuals
provided with the drive, we guarantee the AFD complies
with the EMC Directive 89/336/EEC.
It is possible for the VLT to start upon application of AC
power. DO NOT attempt any maintenance on the VLT,
motor or system machinery without verifying that the AC
power has been disconnected.
DO NOT touch any electrical parts after the AC line has
been disconnected for at least 14 minutes. This allows
for capacitor discharge.
NOTE: The STOP key on the VLT keypad DOES NOT
disconnect the AC line.
It is the responsibility of the user or the person installing
the AFD to provide proper grounding and branch circuit
protection for incoming power and motor overload
protection according to the National Electrical Code
(NEC) and local codes.
Upon request we will issue a declaration of conformity to
the EMC and low-voltage directives. A manufacturer's
declaration for the Machinery Directive 89/392/EEC is
also available.
Caution:
Danfoss VLT
®
and CE Marking
Installation; Safety
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
