Danfoss TG230 Series Скачать руководство пользователя страница 7

Страница: 7 / 108

Page

108

M-AP-001-EN Rev. N

Proprietary Notice

This publication contains proprietary information to Danfoss Turbocor Compressors (DTC).

By accepting and using this manual, the user agrees that the information contained herein

is utilized solely for operating DTC equipment or third party vendor equipment intended for

communication with DTC equipment over a serial communication link. This publication is

protected under the Copyright laws of the United States of America (USA) and most other

countries. The publication of this Guide is owned by DTC and is published as the most recent

revision as indicated on the Title page of this document. This document is for use by DTC

customers only; any use beyond the intended usage of this document is prohibited.

Tests have demonstrated that equipment will function as designed if the installation if

performed in accordance with the guidelines provided in this guide. However, DTC does not

guarantee the equipment performance will work in every physical, hardware or software

environment.

The guidelines provided in this manual are “AS-IS”, with no warranty of any kind, either

express or implied including; without limitation, any implied warranties of condition,

uninterrupted use, merchantability or fitness for a particular purpose.

In no event shall DTC be liable for direct, indirect, special, incidental or consequential

damages arising out of the manufacture, use, or the inability to manufacture or use

information contained in this manual, even if advised of the possibility of such damages. In

particular, DTC is not responsible for any costs, including but not limited to those incurred as

a result of lost profits or revenue, loss of damage or equipment, loss of computer programs,

loss of data, the costs to substitute these, or any claims by third parties. In any event, DTC’s

total aggregate liability for all damages of any kind and type (regardless of whether based in

contract or tort) shall not exceed the purchase price of this product.

DTC reserves the right to revise this publication at any time and to make changes to its

contents without prior notice or any obligation to notify former or present users of such

revisions or changes.

Danfoss Turbocor Compressors Inc.

1769 East Paul Dirac Drive Tallahassee,

Florida 32310

USA

Phone 1-850-504-4800

Fax 1-850-575-2126

http://turbocor.danfoss.com

Содержание TG230 Series













































































































Результаты поиска

Содержание TG230 Series

Отзывы:

Похожие инструкции для TG230 Series

Бренды по названию

Популярные бренды

Danfoss TG230 Series, Руководство по установке

Результаты поиска

Содержание TG230 Series

Отзывы:

Похожие инструкции для TG230 Series

Бренды по названию

Популярные бренды