16
Manual
RS
.8A.Y3.02
©
Danfoss
01-2003
Micromon
Use this option to print the current status of all points.
Note: Only those points which have their log action set to ON or Manual will be
printed.
Use this option to print an individual graph of each of the points in turn. From the
Print Menu, select the Graph of Selected Points option. The Select Period screen
will then appear. Use the '
', '
', '
' and '
' keys to enter the required value and
the '
↵
' key to move through each field. The Printing in Operation screen is
displayed and the data is sent to the printer.
Note: Only those points which have their graph action set to ON or Manual will be
printed.
Use this option to print a list of all the alarms and events. The Alarm/Event List is
printed showing the Alarm List followed by the Event List.
From the Print Menu, select the Alarm List option. The Select Period screen will
then appear. Use the '
', '
', '
' and '
' keys to enter the required value and
the '
↵
' key to move through each field. The Printing In Operation screen is then
displayed and the data is sent to the printer.
Each alarm is given a number from 1 to 999 (restarting at 1 after the 999th) and is
time and date stamped. The description shows the information relevant to each
point.
Similarly, each event is time and date stamped and the description shows the
information relevant to each event.
Note: This operation may take considerable time and paper.
The various codes printed in the status (St) column are defined as follows:
ok
No fault present
Hi
High alarm
Inh
Inhibit
Low
Low alarm
Off
The input is off
OC
Signal over range
SC
Signal under range
The various codes displayed in the printout Reason column are defined as follows:
Fault
probe fault
>
High value alarm greater than high alarm limit
<
Low value alarm less than low alarm limit.
Use this option to print the current setup of the Micromon unit.
When the Micromon generates a new alarm, the following alarm outputs are
activated.
Log of All Points
Graph of Selected Points
Alarm History
Easy Setup
Software Version
Print Menu