Micromon
Micromon
RS.8A.Y3.02
©
Danfoss
01-2003
7
Easy Setup
Language
Clock
Site Name
Number Points Used
Application
To select a language, using the '
', '
', '
' or '
' keys move the selection
box to the required language, then press the '
↵
↵↵
↵↵
' key to continue.
To modify the clock settings, using the '
'and '
' keys move the cursor to the
required field, then the '
' and '
' keys to modify the time and date, press the
'
↵
↵↵
↵↵
' key to enter setting and the '
' key to continue to the next screen.
To enter a site name, use the '
' and '
' keys to move the cursor, then the '
' and '
' keys to select the required characters. Press the '
' key to continue
to the next screen.
Use this screen to select the required number of points to be used. Use the '
'
and '
' keys to increment up or down to the required number.
This screen is used select the application of those points that have just been
selected in the previous screen. Use the '
' and '
' keys to move the cursor to
the required point, then the '
' and '
' keys to move the 'tick' symbol to the
required application. Press the '
' key to accept and continue to the next
screen.
This screen is for setting the alarm parameters for the three different applications.
These are "global" settings, e.g. the high, low and delay values entered for
'Frozen' will apply to all points that have been set as 'Frozen' in the previous
Application setting screen.
Use the '
↵
↵↵
↵↵
' key to select each field and the
' or '
' key to adjust each setting.
Press the '
' key to accept and continue to the next screen.
This screen is displayed giving a summary of all the points that have just been
set. Press the '
↵
↵↵
↵↵
' key to finally accept the setting or press the '
' key to go
Alarm Parameters