1 How to Read these Operating Instructions
1.1.1 How to Read these Operating Instructions
These Instructions will help you get started and mount your MCF 106 A/B in C Option Adaptor. Please read these instructions in full and, in order to be
able to work with the system safely and professionally, particularly observe the hints and cautionary remarks.
Chapter 1,
How to Read these Operating Instructions
, introduces the manual and informs you about the approvals, symbols, and abbreviations
used in this literature.
Chapter 2,
Safety and Conformity
, contains safety instructions and certificates for the MCF 106 A/B in C Option Adaptor option and the VLT Automa-
tionDrive FC 302.
Chapter 3,
Introduction to the MCB 112 VLT PTC Thermistor Card
, informs you about the general aspects of the option and its functions. It also
contains the technical data about the MCF 106 A/B in C Option Adaptor.
Chapter 4,
How to Install
, guides you through mechanical and technical installation.
1.1.2 Available Literature for VLT AutomationDrive FC 300
-
The VLT
®
AutomationDrive FC 300 Operating Instructions provide the neccessary information for getting the drive up and running.
-
The VLT
®
AutomationDrive FC 300 Design Guide entails all technical information about the drive design and applications including encoder,
resolver and relay options.
-
The VLT
®
AutomationDrive FC 300 Programming Guide contains information on how to programme the VLT AutomationDrive. Furthermore, you
will find descriptions of the parameters and parameter lists, which give an overview of the parameters in each group.
-
The VLT
®
AutomationDrive FC 300 Profibus Operating Instructions provide the information required for controlling, monitoring and programming
the drive via a Profibus fieldbus.
-
The VLT
®
AutomationDrive FC 300 DeviceNet Operating Instructions provide the information required for controlling, monitoring and program-
ming the drive via a DeviceNet fieldbus.
-
The VLT
®
AutomationDrive FC 300 MCT 10 Operating Instructions provide information for installation and use of the software on a PC.
-
The VLT
®
AutomationDrive FC 300 IP21 / Type 1 Instruction provides information for installing the IP21 / Type 1 option.
-
The VLT
®
AutomationDrive FC 300 24 V DC Backup Instruction provides information for installing the 24 V DC Backup option.
Danfoss Drives technical literature is also available online at www.danfoss.com/drives.
MCF 106 A/B in C Option Adaptor Instruction
1 How to Read these Operating Instructions
MI.38.F1.02 - VLT
®
is a registered Danfoss trademark
3
1
