![background image](http://html1.mh-extra.com/html/danfoss/mcb-152/mcb-152_installation-manual_3673997044.webp)
e3
0b
e0
82
.1
1
7. To edit the PROFIsafe settings, double-click
PROFIsafe Standard Telegram
at the bottom of the
HW Config
dialog box.
e3
0b
e0
83
.1
1
8. Select the
PROFIsafe
tab in the
Properties
dialog box.
e3
0b
e0
84
.1
1
9. Edit the required settings.
The following 3 parameters can be changed, but normally it is only necessary to change the
F_Dest_Add
parameter:
•
F_Source_Add
- the PROFIsafe address of the PROFIsafe master.
•
F_Dest_Add
- the destination address of the safety option. This address must be the same as set in the VLT® Motion Control
Tool MCT 10 software,
parameter 42-61 Destination Address
.
•
F_WD_Time
- the watchdog time for the PROFIsafe connection.
Configuring the Safety Option
Installation Guide | VLT®Safety Option MCB 152
AN327351953089en-000101 / 130R0578
44 | Danfoss A/S © 2020.02
Содержание MCB 152
Страница 2: ......