Danfoss MCA 122 Modbus TCP Скачать руководство пользователя

Страница: 35 / 46

12-02 Subnet Mask

Range:

Function:

[000.000.000.000 -
255.255.255.255]

Configure the IP subnet mask of the
option. Read-only if

12-00 IP Address

Assignment

set to DHCP or BOOTP.

12-03 Default Gateway

Range:

Function:

[000.000.000.000 –
255.255.255.255]

Configure the IP default gateway of
the option. Read-only if

12-00 IP

Address Assignment

set to DHCP or

BOOTP.

12-04 DHCP Server

Range:

Function:

[000.000.000.000 –
255.255.255.255]

Read only. Displays the IP address
of the found DHCP or BOOTP
server.

NOTICE

A power-cycle is necessary after setting the IP parameters
manually.

12-05 Lease Expires

Range:

Function:

Size related

[ 0 - 0 ] Read only. Displays the lease-time left for

the current DHCP-assigned IP address.

12-06 Name Servers

Range:

Function:

[0 - 2147483647 ] IP addresses of Domain Name Servers.

Can be automatically assigned when
using DHCP.

12-07 Domain Name

Range:

Function:

0 [0 - 2147483647 ] Domain name of the attached network.

Can be automatically assigned when
using DHCP network.

12-08 Host Name

Range:

Function:

Blank

[0-19 characters]

Logical (given) name of option.

12-09 Physical Address

Range:

Function:

[0 - 0 ] Read only. Displays the Physical (MAC) address of

the option.

5.2.2 12-1* Ethernet Link Parameters

Applies for whole parameter group.

Index [0] is used for Port 1 and Index [1] is used for Port 2.
For EtherCAT, Index [0] is for In Port and Index [1] is for
Out port.

12-10 Link Status

Option:

Function:

Read only. Displays the link status of the Ethernet
ports.

[0] No Link
[1] Link

12-11 Link Duration

Range:

Function:

Size related

[ 0 - 0 ] Read only. Displays the duration of the

present link on each port in dd:hh:mm:ss.

12-12 Auto Negotiation

Option: Function:

Configures Auto Negotiation of Ethernet link
parameters, for each port: ON or OFF.

[0] Off

Link Speed

and

Link Duplex

can be configured in

12-13 Link Speed

and

12-14 Link Duplex

[1] On

12-13 Link Speed

Option:

Function:

Forces the link speed for each port in 10 or 100
Mbps. If

12-12 Auto Negotiation

is set to: [ON],

this parameter is read only and displays the
actual link speed. “None” is displayed if no link
is present.

[0]

None

[1]

10 Mbps

[2]

100 Mbps

12-14 Link Duplex

Option:

Function:

Forces the duplex for each port to Full or Half
duplex. If

12-12 Auto Negotiation

is set to: [ON],

this parameter is read only.

[0] Half Duplex
[1] Full Duplex

NOTICE

In POWERLINK this parameter is locked to half duplex.

Parameters

MCA 122 Modbus TCP

MG90P202 - VLT

is a protected Danfoss trademark

Содержание MCA 122 Modbus TCP















































Результаты поиска

Содержание MCA 122 Modbus TCP

Отзывы:

Похожие инструкции для MCA 122 Modbus TCP

Бренды по названию

Популярные бренды

Danfoss MCA 122 Modbus TCP, Руководство по эксплуатации

Результаты поиска

Содержание MCA 122 Modbus TCP

Отзывы:

Похожие инструкции для MCA 122 Modbus TCP

Бренды по названию

Популярные бренды