Danfoss H1P 045, Техническая информация

Страница: 13 / 68

A
G H J K M N S T V W X Y Z D E F
A
H1P
A B
G – Endcap options (Twin port, ISO 6162 split flange ports)
Align the option K: Auxiliary mounting pad 11 926 O-ring ports with options: M + N and T below:
Code With pressure limiter Without pressure limiter(HPRV only)
Suction
filtration Remote or external charge
supply for full charge flow
filtration Suction
filtration Remote or external charge
supply for full charge flow
filtration
E5
– – —
E6
– – –
E9
– – –
F1
– –
Align the option K: Auxiliary mounting pad ISO 6162 split flange ports with options M + N and T below:
D6
– – –
D8
– – –
F2
– – –
F3
– –
H – Mounting
F
ISO 3019-1, flange 101-2 (SAE B)
J
ISO 3019-1, flange 101-2 (SAE B), 2-bolt and speed sensor
J – Input shaft
A1
ISO 3019-1, (SAE-C, 17 teeth splined shaft, 12/24 pitch
G1
ISO 3019-1, outer Ø32 mm - 4 (SAE C, 14 teeth splined shaft 12/24 pitch)
G3
ISO 3019-1, (SAE-C, 13 teeth splined shaft, 8/16 pitch
G4
ISO 3019-1, outer Ø22 mm - 4 (SAE B, 13 teeth splined shaft 16/32 pitch)
G5
ISO 3019-1, outer Ø25 mm - 4 (SAE B, 15 teeth splined shaft 16/32 pitch)
F2
Conical keyed shaft end similar to ISO 3019-1 code 25-3, taper 1:8 (key not supplied with pump)
K – Auxiliary mounting pad ISO 3019-1 (Align with option G: Endcap selection)
NN
None
H1
Flange 82 - 2, outer Ø19 mm - 4 (SAE A, 11 teeth 16/32 coupling)
Shipping cover
H2
Flange 82 - 2, outer Ø16 mm - 4 (SAE A, 9 teeth 16/32 coupling)
H3
Flange 101 - 2, outer Ø22 mm - 4 (SAE B, 13 teeth 16/32 coupling)
H5
Flange 101 - 2, outer Ø25 mm - 4 (SAE B-B, 15 teeth 16/32 coupling)
S1
Flange 101-2, outer Ø22mm-4 (SAE-B 14 teeth 12/24 coupling, not SAE standard)
Technical Information
H1 Axial Piston Single Pumps, Size 045/053
Master Model Code
© Danfoss | May 2017 11063344 | BC00000059en-US1001 | 13