Danfoss FCM305 56, Инструкция по эксплуатации

Страница: 124 / 132

FCM 300 Series
MG.03.B6.2G - VLT is a registered Danfoss trademark
Parameters
Range/number
Function of settings Factory setting Parameter No.
Data read-out: Reference XXX.X Parameter 515
Data read-out: Refer. unit Hz/rpm Parameter 516
Data read-out: Feedback Parameter 517
Data read-out: Frequency Hz Parameter 518
Data read-out: Frequency x scale Hz Parameter 519
Data read-out: Current A x 100 Parameter 520
Data read-out: Torque % Parameter 521
Data read-out: Power kW Parameter 522
Data read-out: Power hp Parameter 523
Data read-out: Motor voltage V Parameter 524
Data read-out: DC link voltage V Parameter 525
Data read-out: FC therm. 0 - 100 % Parameter 527
Data read-out: Digital input Parameter 528
Data read-out: External reference -200.0 - +200.0 % Parameter 533
Data read-out: Status word, binary Parameter 534
Data read-out: FC temperature °C Parameter 537
Data read-out: Alarm word, binary Parameter 538
Data read-out: Control word, binary Parameter 539
Data read-out: Warning word, 1 Parameter 540
Data read-out: Warning word, 2 Parameter 541
Data read-out: Terminal 1, analog input mA X 10 Parameter 542
Data read-out: Terminal 2, analog input V X 10 Parameter 543
Operating data: Operating hours 0 - 130,000.0 hours Parameter 600
Operating data: Hours run 0 - 130,000.0 hours Parameter 601
Operating data: Number of power-up's 0 - 9999 Parameter 603
Operating data: Number of overtemp. 0 - 9999 Parameter 604
Operating data: Number of overvoltages 0 - 9999 Parameter 605
Fault log, read-out: Error code Index XX - XXX Parameter 615
Fault log, read-out: Time Index XX - XXX Parameter 616
Fault log, read-out: Value Index XX - XXX Parameter 617
Reset of hours-run counter No reset/reset No reset Parameter 619
Operation mode 3 Normal function Parameter 620
Nameplate: FC motor type Depends on unit Parameter 621
Nameplate: Software version no. Depends on unit Parameter 624
LCP version Depends on unit Parameter 625
Nameplate: Database identification no. Depends on unit Parameter 626
Nameplate: Application option type Parameter 628
Nameplate: Communication option type Parameter 630
BMC software identification Parameter 632
Motor database identification Parameter 633
Unit identification for communication Parameter 634
Software part No. Parameter 635
TTTTT
echnical functionsechnical functionsechnical functionsechnical functionsechnical functions
Standard Parameter Settings
■
19-4