Danfoss ET9500 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 56

Danfoss ET9500 Скачать руководство пользователя страница 42

8

Decommissioning, disposal

WARNING!

Risk by electrical voltage!

There is a risk of electrocution near the live parts!
• Shut down the machine/unit.
• Disconnect the machine/unit from the power supply.

CAUTION!

Risk of injuries!

Contact with consumables, e.g. oils, greases, test media, im-
poses a risk of injuries for the skin, eyes, respiratory and intesti-
nal tracts!
•

Observe supplier's protection and safety instructions (see
data sheet).

•

Wear personal protection equipment.

•

Do not eat, drink or smoke in the working area and when
handling consumables.

•

Ensure good ventilation.

8.1 Dismantling

This section describes activities to be performed by you as the opera-
tor to ensure the safe dismantling of the machine/unit.
•

The machine/unit may only be dismantled by entrusted and
qualified staff.

•

Check the machine/unit for mechanical tension and consider it
during dismantling.

8.2 Recycling

The machine/unit contains metal, hydraulic hoses, electric cables and
electronic components, depending on the type.

«
...
40
41
42
43
44
...
»

Содержание ET9500

























































Отзывы:

Нет отзывов