Danfoss ET9500 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 56

Danfoss ET9500 Скачать руководство пользователя страница 39

The motor brake is located behind the black plastic cover (1) on the
motor.

1.

Deactivate the machine on the power switch and secure it
against unintentional restart.

2.

Remove nuts on the plastic cover and remove the plastic cover.

3.

Block the shaft using a hexagon key and turn the adjusting nut
to the right using an open-end wrench.

4.

Reposition the plastic cover and check the brake function.

5.

If the braking effect is insufficient, repeat the process.

WARNING!

Hot surface - risk of burns

The brake may become very hot. There is a risk of burns.
• Check the temperature carefully.

6.

Let the motor run for 1 minute after adjusting the brake and then
check the temperature on the adjusting nut.
If the brake is hot, the adjustment has to be corrected.

7.

Turn the adjusting nut to the left by 30°.

8.

Check the braking effect and the temperature again.

9.

Remount the plastic cover and tighten the nuts.

«
...
37
38
39
40
41
...
»

Содержание ET9500

























































Отзывы:

Нет отзывов