Danfoss ET9500, Руководство оператора, Страница: 18 / 56

The workpiece is positioned on the cutting plates (3) in front of the
bending pins (3). During the cutting process, the handle (8) is moved
downward, towards the cutting plate (3). During cutting, the feed fork
(5) is moved forward by a chain drive and pushes the workpiece to-
wards the knife (6). The knife is driven by the motor (1). Move the
handle (8) back to the starting position after cutting; the feed fork will
move back. The cut counter (option) counts the number of completed
cutting processes and can be reset by activating the pushbutton.
Accessories
The machine may be fitted with accessories. A list of the available ac-
cessories is included in the Annex, Section "Accessories".