Danfoss ET9500 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 56

Danfoss ET9500 Скачать руководство пользователя страница 33

5.7 Cleaning

WARNING!

Risk for life and health!

There is an acute risk of injuries when working in the danger
zone of the cutting knife.
•

Disconnect the machine from all energy sources and secure
it against switching on unintentionally.

•

Wear cut-proof gloves.

ATTENTION!

Risk of damage to machinery!

If the machine is cleaned with a steam jet or compressed air, dirt
and water may ingress in the machine and cause serious da-
mage.
• Do not use a steam jet to clean the machine.
• Do not use compressed air to clean the machine.

5.8 Cleaning

ATTENTION!

Risk of damage to machinery!

If the machine is cleaned with a steam jet or compressed air, dirt
and water may ingress in the machine and cause serious dam-
age.
• Do not use a steam jet to clean the machine.
• Do not use compressed air to clean the machine.

1.

Use a vacuum cleaner or a soft cloth to clean the machine.

2.

Loosen the five bolts on the cover plate, remove the plate and
vacuum the hose feed guide.

«
...
31
32
33
34
35
...
»

Содержание ET9500

























































Отзывы:

Нет отзывов