EM-PMI540-T2000 options
Variant
Code
Description
Additional information
High voltage connections
-DUAL
Two galvanically isolated 3
phase systems
Two connection boxes each containing
one 3 phase system with one M32 cable
gland per phase
Low voltage connections
*
Low voltage connections
done with connector
DEUTSCH HD34-24-47PE connector for LV
connections
+LVB1
Low voltage connections
done with connection box
and terminal strip
Connection box with 2x M25 cable glands
(reserve 2x plugged M16 threads
available) and terminal block for LV
connections
Connection extension
*
None
Two connection boxes each containing
one 3 phase system with one M32 cable
gland per phase
+CE1
Double phase connections Extended connection boxes with two M32
cable glands per phase
N-end attachment
*
None
+NE4
Male shaft, no flange
DIN5480 W55x2x26x8a
Bearing insulation
*
Non-insulated bearings
Non-insulated bearings
+BIN
Insulated bearing in N-end
Insulated bearing in N-end
+BIA
Insulated bearing in both
ends
Insulated bearing in both ends
Shaft grounding
*
None
+SG1
D-end shaft grounding
In-built grounding ring
Rotation sensor (resolver)
*
None
No resolver
+RES1
Resolver
In-built non contacting resolver, 8-pole
pair
Winding temperature
sensor
*
Temperature surveillance
3 x PT100 (two wire) in windings
+TEMP4
Redundant temperature
surveillance
6 x PT100 (two wire) in windings
+TEMP5
Redundant temperature
surveillance
12 x PT100 (two wire) in windings
Bearing temperature sensor *
None
+BTMP1
PT100 in bearings
Plug-in connector
Anti-condensation heaters
*
None
None
+HEAT1
One anti-condensation
heater
230VAC/130W
Marine classification
*
No marine classification
+CL1
ABS American Bureau of Shipping
+CL2
BV Bureau Veritas
+CL3
DNV
+CL4
LR Lloyd’s Register
+CL5
RINA
Conformity according to standards
The electric machine has been designed to be in conformity with the following directives and to meet the
requirements specified in the following standards:
User Guide
EM-PMI540-T2000
General information
6 |
©
Danfoss | July 2021
BC265857530809en-000202
