Danfoss EC-C1200-450, Руководство пользователя

Страница: 28 / 69

Required tools
Risk of electric shock during electrical installations. Use insulated tools.
Following tools are required to install the electric device:
Ratchet torque wrench.
Hex head wrench kit with different metric sizes.
Socket wrench kit with different metric sizes.
Cable gland tightening tool. Size according to cable glands.
Cable skinning knife.
Crimping tool for cable lugs.
For more detailed information, see appropriate chapters in this user guide and product data
sheets, http://www.danfoss.com .
Mechanical installation
Allowed mounting position
The electric device must be mounted on a at, heat- and ame-resistant mounting place (for
example on a bracket).
The electric device can be mounted in any direction. Mount the electric device permanently
from the mounting points.
To ful ll the mechanical and environmental standards, for example vibration and shock, it is
recommended to mount the electric device from the bottom side, with at least 6 pcs of M8
screws.
Mounting points are shown in the gure below.
EC-C1200-450
5. Installation
| BC265735231757en-000109
©
Danfoss | Produced By: Danfoss Power Solutions | January 2019 | 27