Danfoss EC-C1200-450, Руководство пользователя

Страница: 19 / 69

12 LV3
13 X2-connector (maintenance connector)
14 EC-LTS unit cooling connection bores 2 x 1/2"
15 Electric device cooling connections 2 x 20mm
16 EC-LTS unit (+DC -option only)
17 EC-C unit
Connection diagram
Figure 4. Electric device power connection diagram (EC-LTS only for +DC -option)
Intended use of the electric device
The electric device is intended only for professional use. Installation, operation and maintenance of the electric
device is permitted only for trained personnel and professionals.
The electric device is intended for xed installation, as a part of complete power generation equipment or system.
Typical applications for the electric device are:
System component, functioning as a speed and torque controller for electric motors
System component, functioning as a current converter, converting alternating current (AC)
from electric generator to direct current (DC) for energy storage.
System component, boosting battery voltage to higher DC-Link voltage.
System component, charging HV-Batteries from higher DC-Link voltage.
Not allowed use of the electric device
It is forbidden to use, handle, maintain and storage the electric device in following ways (including
but not limited to):
Using the electric device for other purposes than de ned in the user guide.
Disregarding the obligation to comply with the user guide, safety signs and rating plate of the
electrical device.
Using the electric device, making adjustments and maintenance without rst reading the user
guide.
Exceeding the designed limits during the operation.
EC-C1200-450
3. Product overview
18 |
©
Danfoss | Produced By: Danfoss Power Solutions | January 2019
| BC265735231757en-000109