Danfoss DEVIreg Room 140F1161, Руководство по установке

Страница: 10 / 40

10
INSTALLATION GUIDE
DEVIreg™ Room
Description Illustration
3. The bending radius for the
Flexpipe must be more than
50 mm.
4. Make sure the floor sensor is
located with equal distances
between two heating
cables (> 2 cm) located at a
representative position.
5. For thin floor constructions:
the Flexpipe should be flush
with the sub-floor surface,
countersink the Flexpipe if
possible.
For thicker constructions: the
Flexpipe including the sensor
should be located such that
the sensor is exposed to a
representative heating level,
our recommendation is still
that the sensor must be located
equidistant between the cables
or mat runs.
1 2
≥