8 | AX452438944357en-000301
© Danfoss | Climate Solutions | 2023.09
3 I Disassembly of the compressor
Important Notes
INFO!
Use only new gaskets for assembly.
The following illustrations show a F18 compressor in standard design.
Components of other designs can differ from these illustrations.
However, the procedure for disassembly and assembly of the compressor is identical.
Disassembly and assembly of the compressor
WARNING! Before starting any work on the compressor:
• Switch of the compressor and secure it against switching on again.
• Relieve the compressor from system pressure
•
Prevent air from infiltrating the system
• Move and transport the compressor using an appropriate hoist
After the work is finished:
• Connect the safety switch and check its function
• Evacuate the compressor
• Before commissioning, check whether all the components installed by the user have been
mounted expertly and are connected pressure-tight to the compressor
• Open the pressure and suction shut-off valves
• Set off the switching-on lock