© Danfoss | Climate Solutions | 2023.09
AX452438944357en-000301 | 19
3 I Disassembly of the compressor
10
Remove pistons and connecting rods
Position in
parts list
Parts list position:
2040
Tools: Needle-nosed pliers
Working course
2040
280
270, 2030
2100
- Mark corresponding pistons
of cylinder bore
- Remove the piston / connecting rod in direction of baseplate
- Remove circlips of the piston pins with needle-nosed pliers
- Press the piston pins out of the pistons and remove pistons
- In order to prevent mix-ups, fasten the connecting rod caps to the connecting rods again