30 | AX452438944357en-000301
© Danfoss | Climate Solutions | 2023.09
5 I Assembly of compressor
7
Assembly of the inserted connecting rods / pistons
Position in
parts list
Parts list position:
2040
Tools: Piston ring plier, spanner SW 13, torque spanner
Working course
290, 295,
300
2100
2100
780
- Compress the piston rings with the piston ring plier and insert the piston into the cylinder liner
- Place the marked connecting rod caps onto the related connecting rods
- Screw on the connecting rod caps and tighten
- Turn the crankshaft by hand. In case the crankshaft does not rotate freely check the seating of the connecting
rods; if necessary, disassemble the connecting rods and carry out this step once more
INFO!
Pay attention to the correct pairing of connecting rods and connecting rod caps!
Renew connecting rod screws or in case of reuse glue in!
29 Nm