Instruction
Disassembling and assembling APP S 2.0-3.5 / APP S 674 2.0-3.5
15
180R9281 / 521B1275 / DKCFN.PI.013.C4.02 / 10.2015
1. Remove shaft seal cover.
2. Carefully push the flushing valve up
through the outlet connection, using a
small screwdriver.
4. Flushing valve parts.
3. Remove complete flushing valve set.
5. Press a new spring onto shoulders of the
poppet guide and the poppet. The spring
must be fastened on both collars. Then
mount new O-ring on the poppet guide.
Turn flushing valve upside down. If spring
is not properly assembled, it will fall of.
6. Lubricate valve with clean filtered water
and push by hand the valve into the hole.
5. Disassembling and
assembling of the
flushing valve
6. How to replace the
shaft seal
Disassembling, please see
Assembling, please see
Page 3 items 2 to 4
Page 11 item 22 to 24
Page 3 items 5 to 6
Page 12 items 25 to 29
