Instruction
Disassembling and assembling APP S 2.0-3.5 / APP S 674 2.0-3.5
9
180R9281 / 521B1275 / DKCFN.PI.013.C4.02 / 10.2015
9. Ensure port plate is fitted tightly against
the bottom.
I
mportant: If valve plate is disassembled
from cylinder barrel, please see page 15
before continuing.
8. Position port plate by using the guide pin.
Do not use force for this operation.
10. Place the pump on a distance block. Make
sure, there is enough free space for the
shaft beneath the housing. Lubricate inside.
11. Carefully lower cylinder barrel into the
housing.
WARNING:
If cylinder barrel is dropped or lowered
too fast into housing, main bearing
and shaft bearing might be damaged.
Replacement can only be done at
Danfoss, Nordborg.
13. Lubricate and position the retainer guide.
12. Place the spring in cylinder barrel.
Distance
block
