Danfoss APP 1.0, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 70

User manual Installation, Operation and Maintenance APP Pumps (APP 0.6-1.0)
6 180R9262 / IOM APP Pumps - v01 / 12.2012
1.1 General
The APP pumps and pump units are manufac-
tured by Danfoss A/S, and are sold and marketed
by a net of authorized distributors world wide.
This manual contains the necessary instructions
for the installation, operation and service of the
pumps used in a Sea Water Reverse Osmosis
(SWRO) or Brackish Water Reverse Osmosis
(BWRO) system.
The APP pumps must not be used for other
purposes than those recommended and
speci
fi ed without fi rst consulting your local
pump distributor.
Use of the pump in other applications not
suitable for the pump unit can cause damages to
the pump unit, with risk of personal injury.
All personnel being responsible for operation
and maintenance of the pump unit must read
and fully understand these instructions,
especially the section “Safety” before:
t
t
Installing the pump unit
t
Connecting the motor pump unit to the
water system
t
Connecting the electric motor and instru-
mentation
t
Commissioning the unit
t
Servicing the motor pump unit, mechanic
and electric parts
t
Decommissioning the motor pump unit
The pump must always be installed and used in
accordance with existing national/local
sanitary, safety regulations and laws.
It is the responsibility of the safety o ffi cer or
the chief operator to assure compliance with all
local regulations that are not taken into
account in this manual.
Changing the pumps’ or motor pump units’
operational limits and hardware:
t
Changes to the delivered pump or motor
pump system may only be done with a
written approval from Danfoss RO Solutions.
t
Operation outside the Danfoss speci fi cations
requires a written approval from Danfoss RO
Solutions.
t
If any changes are made without written
approval the warranty will automatically
become void.
Ensure that these instructions are always
readily available to all personnel concerned.
1.2 Symbols
Indicates something to be noted by the
reader
Indicates a situation which will or could
result in damage to the pump and its
function
Indicates a situation which will or could
result in personal injury and/or damage
to the pump
Electrical hazard - Indicates a high-
voltage warning
Safety glasses required
Hearing protection required
Safety shoes required
Safety helmet required
1.3 Manufacturer and customer service
address:
Danfoss A/S
RO Solutions
Nordborgvej 81, D25
DK-6430 Nordborg
Denmark
Telephone: +45 7488 4024
Fax:
+45 7445 3831
Email: ro-solutions@danfoss.com
Homepage: www.ro-solutions.com
Your local Danfoss pump distributor can be
found on our homepage.
Data sheets and instructions on all accessories
are available on www.ro-solutions.danfoss.com
CE Declaration of Conformity can be found on
page 5.
1. Introduction