Danfoss APP 1.0, Инструкция по установке, эксплуатации и обслуживанию

Страница: 22 / 70

4 180R9262 / IOM APP 0.6-1.0 Appendices - v02 / 12.2012
Data sheet APP 0.6-1.0
1. General information APP 0.6, APP 0.8 and APP1.0 pumps are designed
to supply low viscosity and corrosive
fl uids under
high pressure, eg in seawater reverse osmosis
fi ltration applications and for high-pressure salt
water pumping.
The pumps are based on the axial piston
principle enabling a very light and compact
design. The design ensures that lubrication of
the moving parts in the pumps is provided by
the
fl uid itself. No oil lubrication is thus required.
All parts included in the pumps are designed to
provide long service life, ie long service life with
a constantly high e ffi ciency and minimum of
service required.
The pumps are fi xed displacement pumps in
which the fl ow is proportional to the number of
revolutions of the input shaft and the pump
displacement, regardless of any counter-pres-
sure.
The pumps are supplied with an integrated
fl ushing valve that allows the salt water to fl ow
from inlet to the outlet, when the pump is not
running.
2 1 12 7
11 4 6
11 9 10 5 8 3
1: Shaft sealing
2: Mounting
fl ange
3: Retaining ring
4: Piston/shoe
5: Valve plate
6: Swash plate
7: Cylinder barrel
8: Spring
9: Port plate
10: Connecting
fl ange
11: Housing with bearing
12: Flushing valve
1. General information
2. Bene fi ts
3. Technical data
4. Flow at di ff erent rpm
5. Flushing valve
6. Power requirements
7. Temperature and corrosion
7.1 Operation
7.2 Storage
8. Noise level
9. Filtration
10. Dimensions
10.1 Pump
10.2 Complete unit
11. Installation
11.1 Mounting
11.2 Open-ended system with direct water supply
11.3 RO system with APP pump
12. Service
12.1 Warranty
12.2 Maintenance
12.3 Repair
Data sheet for
APP 0.6-1.0 pumps
(521B1136)
Table of Contents