manualshive.com logo in svg

Danfoss AK-SM 850, Руководство пользователя, Страница: 43 / 74

Поделиться
Скачать
Danfoss AK-SM 850 Скачать руководство пользователя страница 43

AKC ON (Evap shutdown when injection off)

One of the main features of the AKC On function is that the SM 

will detect if there is a pack shutdown condition.  The SM does 

this by monitoring the pack controller for such conditions.  If 

configured to do so, and upon detecting a pack shut down, the 

SM will issue a signal to all (configured) evap controllers under the 

pack suction group to close their AKV valves.  The effect of closing 

the local AKV valve is to limit liquid flow in the evaporator.  Due 

to the AKV valve being closed during a pack shutdown period 

there is a greatly reduced risk of liquid hammer or compressor 

damage upon pack / compressor start up.  The AKC ON function 

must be configured for each pack suction group.  By default, the 

associated evap controllers are set to ‘yes’ under the selection 

choice of Evap shutdown when injection off.  If a evap controller is 

not required to be part of the suction group AKC ON function, set 

this value to ‘No’. 

Pack Configuration

Under the settings / Summary screen set the question

Evap shutdown when injection off to ‘YES’

Evap Configuration

If the Evap is not required to be part of the AKC ON function, modify 

the question

Evap shutdown when injection off to ‘No’

AK-SM 850 

User Guide 

Lit. no. 

USCO.PI.R1.E1.02 © Danfoss 07-2013 

43

Содержание AK-SM 850











































































Отзывы:

Нет отзывов